Andrew, What microphone are you trying to use? That is an important question.
It must conform to either the Elecraft or the Kenwood microphone jack pinout to use the front panel K3S connector. The rear panel Mic jack works for those microphones that use a 3.5mm plug (Heil, Yamaha CM500 and other 'computer' microphones).
You must select in the menu between the front panel mic jack and the rear panel. If the microphone has an electret element (Elecraft MH2, Yamaha CM500 or computer mic), then you must set Bias on. If it is a dynamic microphone (Kenwood or some Heil microphones), the Bias must be set to OFF.
73, Don W3FPR On 4/30/2016 6:09 PM, Andrew Hebden wrote:
Hi, I have completed my build following the manual and everything seems to work fine until I started to try and set it up for SSB. I can get full output using the two tone test but nothing through the microphone. I also tried a another microphone plugged in to the rear mic socket. Still nothing. Any suggestions?
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com