HiWin4K3Suite supports this without hardware. 73 Tom
Sent from my Samsung Galaxy smartphone.-------- Original message --------From: Jim Brown <j...@audiosystemsgroup.com> Date: 2016-05-20 3:56 PM (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KAT500 with KX3 This looks like a nice pieces of software, but it is only needed if you're feeding the KAT500 less than 10-20W (that is, KX3 barefoot). The KAT500 senses operating frequency from RF, but it needs about that level to do so. Another good reason for using this band decoder is to automatically switch antennas or bandpass filters. 73, Jim K9YC On Fri,5/20/2016 11:28 AM, ke9uw wrote: > You need the Paula Keezer KX3 band decoder. Makes the KX3 look like a K3 for > the purpose. > > http://www.nx1p.net/what-is-a-kx3-band-decoder/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to tom...@videotron.ca ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
