A new to me low SN# K3..no problems on CW. Noise blanker now works!
I "think" all the SSB settings are ok. I run SO2R with a YCCC SO2R+ box, so audio gets routed through a laptop, then out to the so2r box, then to one of 2 rigs. When on SSB I hear a moderately loud feedback-ISB noise w/ an added pulsing noise in my earphones (monitor) (and also outgoing on the air). It's probably equal to about 25w or 25% of my outgoing sound. No good. I initially thought it was my cheapie antique unshielded FTDI based serial to USB adapter, as it had LED's which flashed to the exact pulse I was hearing, so I replaced it with a brand new FTDI based cable. Same sound. If I plug a mic directly into the radio, no problems. Another radio on my same (SO2R) setup has no noise on the audio, so do I have something not set right in the rig, or what's going on with my com port? Thanks for any insight. Mike VE9AA Mike, Coreen & Corey Keswick Ridge, NB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
