Is the K3S RS232 set to 38400 b? >From HK3W Wed May 25 07:41:45 EDT 2016
The Microham program does not recognize de K3 This is how I have it connected: 1. The Y cable is conected to the K3S ACC port. 2. One of the Y legs goes to the MicroHam's ACC. 3. The other leg of the Y cable goes to the XCVR port on the KAT500. 4. The E8504643 cable goes from the KAT500 (AMP) to the KPA500 AUX1 port. 5. The Microham RS232 cable is connected to the PC port on the P3. 6. The XCVR port on the P3 is connected to the RS232/P3 port on the K3. I have a leftover Y cable as Elecraft sent me 2. I use 38400 bps in baud rate I have K3S + P3 +KAT500+KPA500 Regards Siso HK3W ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
