> Next to try and set up the microham for digital work.
Which microHAM Interface? In general, set the K3/K3S to DATA mode and select MENU:MIC SEL = LINE IN, set Mic Gain (LINE) to about 15 and configure the microHAM interface audio levels as documented in the "Setting Audio Levels" section of the microHAM Users Manual. As a final "touch up" adjust the K3 "Mic Gain" for four bars of ALC (the fifth bar can flicker). 73, ... Joe, W4TV On 5/29/2016 6:54 PM, Ross wrote:
Thanks for all the comments about the signal link. I found the problem when checking Airlink express, I had the volume and tx levels set to almost zero, in Airlink express so whenI reset them to max, everything popped into life and all my other digital programs then worked perfectly. Next to try and set up the microham for digital work. All advice very gratefully accepted. Thanks Ross ZL1WN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to li...@subich.com
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com