It is available from elecraft. Order E850427. It's normally supplied with the P3.
You can roll your own. K3 end is a standard RCA type connector. P3 end is a 2.1 mm barrel connector. The + line goes from the pin on the RCA to the center on the barrel. If you have the P3SVGA option installed in our P3, check the power connector on the back of your K3. It needs to say 1.0 amp max. If it says 0.5 A max, you'll need to do a mod on your K3. If the mod is needed you can do your own. Elecraft provides instructions and parts. Order K312MDKT. Also, you can have Elecraft do it for you. 73, Ron AC7AC -----Original Message----- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of w3...@comcast.net Sent: Sunday, June 5, 2016 6:04 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Power cable for P3 Hello: Does anyone know who may make a 12v dc power cable for the K3 to the P3? I did not see one on the Elecraft site, and would like to get one. Thanks. Chris W3CMP ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@elecraft.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com