Have you set all devices to 38400 baud? The P3 will force the K3 to that speed when you turn it on.
Sent from my iPhone ...nr4c. bill > On Jun 13, 2016, at 11:55 AM, William Levy <wgl...@gmail.com> wrote: > > Gentlemen, > > My K3 powers on the P3 and the Expert 1.3. > Out the back of my K3 the 15 pin and 9 pin go to the Expert, the 9 pin > Serial is split and goes to the P3. > > When the P3 is OFF the K3 and Expert talk beautifully together. When the P3 > is on the band data gets lost on the way to the Expert and the P3 works > fine. > > So my question is how do I get the Serial Data on the 9 pin K3 to talk > correctly to both Expert and P3? > At the moment the Y splitter is not doing the job. > > Perhaps there is a trick I don't know or a box I need to add to the station. > > Thoughts? > > Sincerely, > > Bill N2WL > Meeker CO > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com