Hi Leroy, I recently bought a K3s and after eventually finding out that I had to change the default configuration to have the bias turned on it seemed to work. My MH2 came with an eight pin plug already fitted that uses the front panel mic socket. I still have a problem in that I don't find any difference between the high and low mic settings and need to have my mic gain set at 2 or 3 as well as speak with the microphone about 3 inches away from my mouth otherwise I over modulate which gives a very poor signal. I am sure something is not right but can't find what is causing this at the moment. It may be my big mouth but I don't have this problem with my KX3 which uses the MH3 microphone and "expected" mic settings. Everything just works fine on that. When time permits I will look into fitting a small attenuator into the mic lead so that I can get a more stable ALC reading. I haven't yet tried using the back panel mic socket but may give it a try soon with my Sennheiser headset to see if it overcomes some of the mic gain issues I have with the MH2. Andrew G8BYB
-----Original Message----- From: lmarion Sent: 14 June 2016 01:48 Subject: [Elecraft] MH2 on K3? Where is this plug in for a MH2 on the front panel? Mine won t work on the rear panel plug in. I ordered a MH3 as well, II t won t work either. What microphone are you guys using on the K3S that uses the 8 pin front panel plug? New K3S that I can t talk on. Leroy AB7CE ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com