Bench grinder, gloves, and grind away - with caution! Lose your grip and lose your screw! Ken - ke4rg
-----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Matt Zilmer Sent: Thursday, June 16, 2016 9:38 PM To: [email protected] Subject: Re: [Elecraft] KXPD3 thumb screw Hi Dennis, This will work, but you're better off ordering the replacement thumbscrew (E700245). The machining on this thumbscrew replacement meets our specs for the KXPD3 when used with the KX3 and KX2 transceivers. 73! Matt Zilmer KX2 Project Manager On 6/16/2016 6:19 PM, Dennis L. Haarsager wrote: > Got my KX2 today, SN 314. Pretty sweet! But, unfortunately, the > KXPD2 is back ordered. I already have a KXPD3 with the older "pointy" thumb screw. > Has anyone had luck just grinding the point down? > > 73, Dennis, N7DH/1 > -- Always store beer in a dark place. - R. Heinlein ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
