I believe these are what you are thinking of: http://www.neutrik.com/en/audio/powercon/
On Sun, Jul 3, 2016 at 6:39 PM, Edward R Cole <kl...@acsalaska.net> wrote: > I only have power-pole's on my K3/10 and KXPA-100. > > I installed a power-pole on the CCI 140w linear I built, but would not do > it a second time. None of these power-pole will stay seated if equipment > is physically moved. > > I very much like the power connectors used by DEMI on their transverters > but do not have a source for them. I chose 4-pin mic connectors to use as > dc power and PTT jack on the 80w 2m Linear Amp I built last winter (for > twelve customers). Hardly any mics use that connector anymore so not > likely one would connect a mic there <smile>. > > For commercial equipment I used multi-pin Mil-spec threaded round > connectors. They cost over $30 so hams would not pay that. But for > hard-duty usage they are super. You can hold the weight of the Pelican > Cased equipment via the cord! Plus they are water-tight. > > 73, Ed - KL7UW > http://www.kl7uw.com > "Kits made by KL7UW" > Dubus Mag business: > dubus...@gmail.com > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to ppa...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
