Actually you can charge and operate at the same time.  Basic charge voltage is 
13.2 and finishing voltage is 14.6 volts.  I've never had a problem with any 
Elecraft (or other) ham gear at either voltage.  

Float charge would work just fine but I wouldn't make a habit of it.  The 
control modules wired between cells need 14.6 volts (for 4S configurations) to 
trigger their cell balancing ability.  Lead acid cells balance automatically 
when in series.  LiFePO4 cells do not.

But beware the charger RFI.  The 10 amp chargers from BioennoPower are strong 
generators and I can't use them in the shack to recharge either the battery in 
use or any other battery while I'm on 80 meter CW.  

I'm testing some alternative high amp chargers and have found at least one that 
is RFI quiet.  I'll be testing a second, less expensive, alternative this week.
-- 
Marc


> On Jul 11, 2016, at 3:58 PM, Wes Stewart <wes_n...@triconet.org> wrote:
> 
> Perhaps it would be overkill to consider one of these for my purpose anyway, 
> but based on this thread my interest was piqued about using one of these in 
> the shack to cover short power outages.  I've learned that you CANNOT charge 
> and feed a load at the same time, i.e float charge.
> 
>> On 7/11/2016 5:44 AM, Clay Autery wrote:
>> Thanks again, Jim for linking to this vendor.  Just ordered the 12
>> Amp/Hr battery they had on promotion with charger to 1) try them out,
>> and 2) to power the K3s/P3 while RFI, et al hunting with all or most of
>> the shack service shut down.
>> 
>> ______________________
>> Clay Autery, KY5G
>> MONTAC Enterprises
>> (318) 518-1389
>> 
>>> On 6/30/2016 11:28 AM, Jim Brown wrote:
>>> This sale offers good discounts on some fine backpacking products from
>>> a ham-friendly company.
>>> 
>>> 73, Jim K9YC
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mveene...@yahoo.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to