How about this one?
https://sage-shop.com/epages/qrp-shop.sf/en_GB/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapterBest%C3%BCckt
A K2 IF adapter kit from QRP shop
https://sage-shop.com/epages/qrp-shop.sf/en_GB/
??
73, tom w7sua
On 7/13/2016 5:06 AM, Don Wilhelm wrote:
Tom,
The answer is "yes" and "maybe".
The P3 can tune to the K2 IF easily enough (menu setting) - in fact it
can be tuned to anywhere between 455kHz and 21MHz.
The problem is getting the IF out of the K2. To accomplish that, a
buffer amplifier is needed to keep from loading the K2 IF.
Clifton Labs used to have their Z10000-K2 buffer amplifier to do exactly
that task, but unfortunately Jack Smith is now SK.
I had obtained information that DX Engineering had taken over the
Clifton Labs stock, but I don't see anything of it on their website.
If someone would build a buffer amplifier similar to the Z10000, then it
would be possible.
73,
Don W3FPR
On 7/13/2016 3:18 AM, Thomas Taylor wrote:
Can the P3 display unit be used with a K2? If so, are mods necessary for
either the K2 or P3?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to t...@w7sua.org
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com