Your problem is obviously with N1MM+, not with your elecraft rigs. It would have been more appropriate to post your message to the N1MMLoggerPlus reflector.
Be that as it may, my guess would be that you are using an inappropriate N1MM Logger.ini (configuration) file, namely one that has been configured for a dual-receiver K3. In the N1MM+ Config menu, make sure the Sub Receiver Always On menu item is not checked. It appears as if you may have this option selected; if so, that would be what is causing Dual RX to be turned on when you change bands. In the Configurer, make sure the SO1V radio button is selected; I suspect you may have SO2V selected; SO2V is not really appropriate for a KX2 or KX3. Also, make sure that the selected radio type is Elecraft KX3, not Elecraft K3. N1MM+ does not send ATU commands to the radio as far as I am aware. I can only guess that your configuration is such that K3 commands for the second receiver are being sent, and that these are having some kind of side effects on the KX2/KX3, possibly because the second receiver's Entry window is starting up on a different band. Using an ini file that is configured for the correct radio in SO1V mode should resolve this. If you wish to use N1MM+ with more than one radio (not SO2R, just different radios at different times), you should not try to use the same ini file for all. N1MM+ has a way to use multiple ini files for this kind of situation. This is described in the on-line documentation at < http://n1mmplus.hamdocs.com/tiki-index.php?page=Program+Installation+and+Setup&structure=N1MM+Logger+Documentation#Multiple_ini_Files >. 73, Rich VE3KI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com