Doug,
None that I know of.
If you have a bandsaw (or know someone who has one), I would cut a wedge
from a 2x4 that is as long as the K1 is deep.
That should be a better solution than a book.
73,
Don W3FPR
On 7/31/2016 11:38 AM, Doug Hensley wrote:
Does anyone make a simple flip down bail (wire stand support) for the K1
as is available for the K2 ?
I'm continually tilting the K1 back using a book or similar to position the
front panel for easier viewing. 1.25 to 1.5" tilt should work.
TIA,
Doug W5JV
K1 007xx
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donw...@embarqmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
