I've been using the MN110 function to assign a new macro to the currently pressed button to switch to a different macro. That macro then uses the MN110 function to restore the previous macro to that switch after performing its functions.
Is there a way to make the macros on the KPOD self modifying in this way? Not obvious since the buttons always perform the same macros. In my case a PF1 on the K3 performs macro1 which is split, sub on, up one and switches to Macro2. A subsequent PF1 on the K3 clears all out and switches back to Macro1. On the KPOD a F1-Hold executes Macro1 but the switch to Macro2 never occurs. A subsequent hold of F1 merely repeats the Macro1. It requires F2-HOLD to execute the MACRO2. So how does one do self modifying macros on the KPOD to perform a toggle for instance? Thanks jim ab3cv ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com