Hi Ray, That's exactly what I am proposing ... an RX I/Q *option* board (i.e., KXIQ2) for the KX2. The KXIQ2 would serve as an alternative to the KXIO2 Real Time Clock option board, replacing the AUX output of the KXIO2 with an RX I/Q output. As an *option* board, the KXIQ2 wouldn't add to the base cost of the KX2.
> I’m sure that the Elecraft people must have considered the > idea of such a port on the KX2, I strongly suspect the earliest KX2's (prior to the field test units) had an RX I/Q port. > but made the decision that most KX2 users would not take > advantage of it. I don't think this was the reason. > So, my money would be on some 3rd party developer figuring > out how to bring out the I/Q signal I'd welcome a third-party KXIQ2 option board to expose RX I/Q (even if it does void the factory warranty). I periodically ask for the KX2 schematics for this vary reason. Joe KF5WBO -- View this message in context: http://elecraft.365791.n2.nabble.com/KX2-KX3-KXIQ2-Best-Base-Station-KX2-vs-KX3-tp7621965p7622011.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com