What baud rate is K3 set to? Should be USB if using the USB to USB cable.
I don't think the computer will connect to the radio if radio is not ON. You do not use a KUSB with the KIO3B upgrade. You should also get the new P3 "Y" cable to connect the P3 to the K3. Sent from my iPhone ...nr4c. bill > On Sep 10, 2016, at 8:12 PM, Louis Ives <hotrod...@hotmail.com> wrote: > > I would like to thank everybody that responded to my questions about > upgrading my K-3. All of the upgrades went without a problem, due in large > part to the advise given. Everything works but I have a strange working > K103B. The only way it will connect to the K3 utility page is to connect my > old KUSB cable to the cable that came with the K103B, (con3) and connecting > to the RS232/P3 port. The new USB cable (con4) will not work no matter what I > do. The configure menus shows that the K103B is being recognized. I set it > to NOR, but I see that it can be set to HF-TRN or TRN also. I hope that I > have it set correctly. I checked my computer and it is listing port 4 as > working correctly and is recognizing the new USB cable. I have also found > that to connect to the K3 utility the K3 must be powered up. The manual > stated that it should connect to the utility regardless if it is powered up > or off. Any advise on this would be appreciated. > > PSent from my iPad > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
