Don, Touched the xtal solder points, that did the trick. TNX Jack W4GRJ On Sep 23, 2016, at 10:18 AM, Don Wilhelm <donw...@embarqmail.com> wrote:
Jack, The only things that are changed between bands are the crystals and the switch position. If you do not have bad switch contacts (check with an ohmmeter), then you have bad crystals - try resoldering them. 73, Don W3FPR > On 9/23/2016 9:51 AM, Jack Satterfield wrote: > Just tried my XG2 on a new radio, it's only working on 7.040 > > Tried on another radio to confirm it's the XG2, battery is good. Any > suggestions to check why it's not working on all three freqs. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w4...@satterfield.org ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
