Beautiful! That's the Rosetta Stone I needed; From 9 on down to 16 in the Command Tester in the Utility:
9 = F1 10 = F2 11 = F3 And so on to 16 - F8 Maybe they will mention that in the next Rev of the owner's manual. Thank you all, now I'll have to figure out the more complex macros and how I might want to use them but that will come. And thanks to those who provided links to help me out as well, I will certainly check them out. 73, Gary KA1J > > Gary, > > Here are mine as of now: > > > > 11 and 12 do what you want. 11 is F3 (tap), and 12 is F4 > (tap). > > 73, Jim N7US > > > -----Original Message----- > From: Elecraft [mailto:[email protected]] On > Behalf Of Gary Smith > Sent: September 28, 2016 22:41 > To: [email protected] > Subject: Re: [Elecraft] K-Pod macros Around? > > I've been trying to find the info I am > looking for but I must be dumber than a box of New England > boulders. > > With the immediate goal of tapping the > K-Pod buttons to do the following: > > F3 = M3 (macro SWT35) > F4 = M4 (macro SWT39) > F7 = M1 (macro SWT21) > F8 = M2 (macro SWT31) > > I haven't found out how to make the F > buttons fire a specific macro. Some of the info below was > very helpful, such as SWT21 and that helped me figure out > more. > > But how do I ascribe a button on the K-Pod top a specific > desired macro? > > > Well thanks! I got the K-Pod a bit ago but it's been > unused because of > > other projects. My owner's manual only has 11 pages to it > so there > > have been a lot of revisions in a short time. > > > > Thanks & 73, > > > > Gary > > KA1J > > > > > I believe what you want is in the Rev C K-Pod Owner's > Manual on page > > > 16. IF you have an older version, you can download the > Rev C manual > > > here: > > > > > > > http://www.elecraft.com/manual/E740285%20KPOD%20Owner's%20Ma > nual%20R > > > ev %20C.p df > > > > > > For example, SWT21; will "tap" M1 on the K3, SWT32; will "tap" > M2 > > and so on. > > > > > > 73, Ron AC7AC > > > > -----Original > Message----- > > From: Elecraft > [mailto:[email protected]] On Behalf > > Of Gary > Smith Sent: Wednesday, September 28, 2016 3:43 PM To: > > > [email protected] Subject: [Elecraft] K-Pod macros Around? > > > > > It's time to finally start using the K-Pod. I had hoped it > might > > control the P3 as well as the K3s but apparently A P3 > function not > > happening yet. > > > > I would though like to > assign the > > functions of the K3s memories M1-M4 to the K-Pod > and if someone > > knows of a page with macros for this & maybe > even other nifty Macro > > treasures, I'd appreciate a link > > > > > Thanks & 73, > > > > Gary > > KA1J > > > ____________________________________________________________ __ > > > Elecraft mailing list > > Home: > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: > http://mailman.qth.net/mmfaq.htm > > Post: > mailto:[email protected] > > > > This list hosted by: > http://www.qsl.net Please help support this > > email list: > http://www.qsl.net/donate.html Message delivered to > > > [email protected] > > > > > > > > > ____________________________________________________________ __ > > Elecraft mailing list > Home: > http://mailman.qth.net/mailman/listinfo/elecraft > Help: > http://mailman.qth.net/mmfaq.htm > Post: > mailto:[email protected] > > This list hosted by: > http://www.qsl.net Please help support this email > list: > http://www.qsl.net/donate.html Message delivered to > > [email protected] > > ____________________________________________________________ __ > Elecraft mailing list Home: > http://mailman.qth.net/mailman/listinfo/elecraft Help: > http://mailman.qth.net/mmfaq.htm Post: > mailto:[email protected] This list hosted by: > http://www.qsl.net Please help support this email list: > http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
