Does the factory do a full per-band calibration, or do they just calibrate on 20m and extrapolate? If the latter I'd suggest to do the full per-band calibration yourself even for a factory-fitted roofing filter, as it does make a difference (obviously back up your config first so you can restore to factory settings/calibration if needed)
73, Matt VK2RQ On Fri, Oct 7, 2016 at 5:38 AM +1100, "Ray Sills" <raysil...@verizon.net> wrote: Also, IF you order the roofing filter for the KX3…. even with a kit purchase…. the factory will calibrate it for you, so all you need do is install the little board. They have a test jig, so that the filter will be tested with YOUR particular main board. Best of both worlds… save some money, and get free factory calibration. 73 de Ray K2ULR KX3 #211 > On Oct 6, 2016, at 12:00 PM, Walter Underwood wrote: > > The roofing filters require some calibration. If they are factory-installed, > Elecraft does that for you. All the other options are exactly the same > whether factory-installed or user-installed. > > wunder > K6WRU > Walter Underwood > CM87wj > http://observer.wunderwood.org/ (my blog) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to matt.vk...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com