The Key Out (LP) lines pull the TX Inh inputs low when transmitting.
However, this is the "simple cross connection" that will result in
neither transceiver transmitting if both try to transmit.
73,
... Joe, W4TV
On 10/9/2016 2:16 AM, Val wrote:
Charlie, how this could work after there is no way the TX Inh inputs to
be pulled down?
73, Val LZ1VB
Roger:
Look at:
http://www.kkn.net/~n6tv/SimpleElecraftK3SO2RLockoutCircuit.pdf
I belive it's different than the one you described in your email. I've
used this one successfully.
73 charlie, k1xx
On 10/8/2016 12:59 PM, irdixon+lists wrote:
Hi All
I don't like re-inventing the wheel, so I'm looking for a design to
copy!
I'm looking for a circuit to interlock two K3 so they cannot transmit
simultaneously. I am aware of the simple connection cross linking the
PTT out and Inbibit input on the 15 pin connector. That does not meet
our needs as when both try to transmit - both are inhibited !!
TIA
Roger - G4BVY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
