I don't know the suggested turning radius of LMR400. In my system I use about 6 foot jumper of RG213 to do the section around the rotating section. I use a KLM 8 el and the total length is longer.
Mel, K6KBE From: John Stengrevics <jstengrev...@comcast.net> To: hsherr...@reagan.com Cc: Elecraft Reflector <elecraft@mailman.qth.net> Sent: Monday, October 10, 2016 3:17 PM Subject: Re: [Elecraft] Antenna Question I run LMR400 to my 6 & 2 meter antennas with no problems. Just leave enough slack around the rotor and you’ll be fine. John WA1EAZ > On Oct 10, 2016, at 6:14 PM, hsherr...@reagan.com wrote: > > OK all. I'm installing a 6m rotating beam and feeding it with LMR400. Would > you connect the LMR to the antenna and allow it to move with the rotation, or > run a short length of something much more flexible between the antenna and > LMR? I have my concerns that the solid heavy inner conductor of the LMR won't > take much movement. > > Harlan > K4HES > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jstengrev...@comcast.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to farrerfo...@yahoo.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com