I do not have this problem, and I have P3/SVGA. Do you have all the latest production firmware? Or have you installed a beta?
73, Guy K2AV On Mon, Oct 17, 2016 at 5:59 PM, Irwin Darack <idar...@gmail.com> wrote: > I have a P3 with the SVGA board installed + an external monitor. > > SVGA Monitor Height = Main > P3 = 30 > > When ever I turn on the P3 (and monitor), I need to reset the Waterfall > Height. The Height is fine on the P3, but takes up 3/4 of the screen on > the external monitor. The P3 remembers the original Height setting. To > reset the Waterfall Height on the external monitor, I need to go to the P3 > Waterfall Height, make any change in the Height value, and then the > Waterfall Height on the external monitor corrects itself. Not sure why the > External Monitor requires this and if it has something to do with the > P3 SVGA board or a monitor setting? > > Thanks, Irwin KD3TB > > > > > -- > Irwin KD3TB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k2av....@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com