So lock the VFO. Sent from my iPhone ...nr4c. bill
> On Dec 19, 2016, at 2:24 PM, rfphelps <rfphe...@snet.net> wrote: > > I've had 16 years of Elecraft experience with the K2 and a bit less with the > K1 and KX1 - then I added a KX2 last September! Operating it has been a > real blast! > > I suspect that my question is generic to the K3, KX3 and KX2. > > > > Operation on 60 meters pretty much requires that you program the five CW and > five SSB frequencies in memory channels to avoid a harmless "misstep" which > might offend our FCC friends. I've stored the frequencies in Channels 61 > through 70 and labeled them appropriately. I then recall the memory channel > that I want to operate on. So far, so good. > > > > The instant that I go into transmit, the rig transfers the frequency, mode, > et al into the VFO mode and subsequent operation is conducted on the freely > tunable VFO with no reference to the memory channel. I find this to be a > bit unnerving since it is so easy to nudge the rig off the specified > frequency. On anything other than 60 meters, I wouldn't care. > > > > Am I missing something? Would appreciate any comments! > > Regards, > > Dick, > > K1SW > > > > > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
