The XMIT button should parallel the foot switch. I would bet your
problem was pressing the button for too long - which activates the tune
function with (as you observe) no audio. Just "tap" the button and it
should put you into transmit with audio.
73 - George - W3HBM
On 12/26/2016 11:57 PM, Jim Larson wrote:
I figured out what the problem was.
I was using the XMIT button on the front of the K3S to go to transmit mode.
The TX light turned on, but no audio was passed. I then plugged in a foot
switch on the mic cable and the remote goes into transmit mode and passes audio.
It appears to have been user error on my part, thinking that the XMIT button
would do the trick.
Thanks for the input from a couple of guys.
73, Jim - KK7A
On Dec 26, 2016, at 6:49 PM, Jim Larson <j...@sailidaho.com> wrote:
Hi Mitch. Thanks for the response.
The Heil is plugged into the front AUX/MIC jack. The headset first goes
through the adapter changing the 1/8” plug to plug compatible with the front of
the K3S. That plug then goes into a second adapter that converts it into the
RJ45 plug that connects to the AUX/MIC jack.
From what I can gather, then iC element is a condenser type that must be
powered. I’m guessing the K3S supplies that voltage since it works locally.
The RemoteRig manual says the following:
"Control-RRC only: JMP-1 is placed behind the TTL connector. With the strap in place
a DC voltage is feed to the microphone element. All ICOM microphones should be DC-feed.
Dynamic microphones like the ones used by Kenwood should not be DC-feed. HEIL microphones
should not be DC-feed either."
It kind of contradicts since it states that Hiel mics should not be DC fed, but
maybe that was for the older HC4/5 elements.
Anyway, all of the pieces were purchase from Elecraft, so I would assume they
would all work together. :-)
Jim
On Dec 26, 2016, at 6:35 PM, Mitch Wolfson, DJØQN / K7DX <dj...@gmx.net
<mailto:dj...@gmx.net>> wrote:
Jim,
Is the Heil plugged into the rear, or the front? If in the rea, then you must
first unplug the RRC to prevent a remote connect, then switch the audio to the
rear jack. If you leave the RRC's connected, you will only change the remote K3
and not the control K3.
73,
Mitch DJ0QN / K7DX
Mitch Wolfson DJØQN / K7DX
10285 Boca Cir, Naples, FL 34109
Skype: mitchwo
USA: Home:+1-239-221-9600 - Mobile:+1-424-288-9171
Germany: Home:+49 89 32152700 - Mobile:+49 172 8374436
On 26.12.2016 20:27, Jim Larson wrote:
I have a K3S connected to a remote K3 using the RemoteRig boxes. With the MH2
hand mic everything works great, but with my new Heil ProSet with the iC
element (purchased from Elecraft), I do not get any transmit audio at all.
Running the ProSet into the local K3S (no RemoteRig), I am getting audio out,
so I know the headset is fine.
Is there a configuration change that needs to be made on the RemoteRig to work
with this ProSet iC element?
Thanks, Jim - KK7A
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
<http://mailman.qth.net/mailman/listinfo/elecraft>
Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
Post: mailto:Elecraft@mailman.qth.net <mailto:Elecraft@mailman.qth.net>
This list hosted by: http://www.qsl.net <http://www.qsl.net/>
Please help support this email list: http://www.qsl.net/donate.html
<http://www.qsl.net/donate.html>
Message delivered to dj...@arrl.net <mailto:dj...@arrl.net>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to gkid...@ilstu.edu
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
