Or just spend the ~$70 and buy an MH2. It's already wired ready to go. Sent from my iPhone ...nr4c. bill
> On Jan 1, 2017, at 6:49 PM, Don Wilhelm <donw...@embarqmail.com> wrote: > > Ron, > > I am not going to give you a step by step set of instructions, but the K3 (no > hyphen) manual has the pinout for the 8 pin Foster jack, and the KX3 manual > has the pinout for the MH3 mic plug. > Match up the AF lines and the shell (AF ground) with the 8 pin connections, > and match up the PTT on the MH3 plug ring 1 to the PTT pin on the 8 pin. > The PTT return is a little more "tricky" and you should connect the MH3 ring > 2 to wither pin 7 or pin 8 on the 8 pin Foster plug. > > You will need to turn bias on in the K3 menu, and the UP/DN buttons on the > MH3 mic will not work - but you should have audio and PTT. > > 73, > Don W3FPR > >> On 1/1/2017 6:23 PM, Ron Manfredi wrote: >> HNYto all! >> >> Has anyone made an adapter cable to allow the MH-3 mic to be used with >> the K-3? I acquired a KX3 with its mic, and a K-3 without a mic, and >> would like to be able to use the same mic on both rigs. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com