Bill,
Make sure the JT65 program knows to use your sound card for in and
out, and that you have levels set correctly. If there are multiple cards
attached to your computer, you could have inadvertently picked the wrong
one. At some point, all of use will have done that a few times. :-)
73,
Barry
K3NDM
------ Original Message ------
From: "Bill Wiehe via Elecraft" <elecraft@mailman.qth.net>
To: "Elecraft Reflector" <elecraft@mailman.qth.net>
Sent: 1/9/2017 9:21:02 PM
Subject: [Elecraft] K3 DATA A Mode not working
I recently downloaded a JT65 program and after several days of flawless
operation, my K3 stopped transmitting in DATA A mode. The K3 keys but
nothing is transmitted and no power out. I changed over to BPSK31 via
HRD using DATA A with the same results. All the other modes (RTTY FSK,
CW, SSB) work fine with no issues. Only DATA A seems impacted. I
reloaded the Firmware from the website and went through the
Configuration tables and that all that appears correct.I must have
missed something someplace so any help would be appreciated.Thanks,
Bill-W0BBI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k3...@comcast.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com