When you turn off the switch on the meter you are cutting power. When you turn of the PS you are probably watching the PS Caps bleed down to zero (hence the fade)
From: stan levandowski <sjl...@optonline.net> To: Elecraft@mailman.qth.net Sent: Saturday, January 14, 2017 12:25 PM Subject: [Elecraft] (W1) W1 Power/SWR Meter Question Will I harm my W1 by leaving the W1 Power slide switch in the "on" position and turning the meter on and off with my station supply? I'm asking because the tiny slide switch seems rather fragile and using it perhaps several times a day is sure to eventually break it. I noticed that when I power the W1 off with the station supply, the green LED slowly decays; when turning the W1 off with the slide switch, the same LED goes out immediately. That suggests that the microprocessor is involved in shutdown. I know that all Elecraft transceivers require an orderly shutdown via their onboard processors. Does this apply to my W1 also? Am I looking for trouble here?? Thanks and 73, Stan WB2LQF ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hlyin...@yahoo.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com