Hi Barry,
Well I was keeping an eye on Win4K3 because I was looking for a non-contest
program that was more modern, but at the time I looked at Win4K3 the only CW
generation I could find was done by purchasing a WinKey. I was just corrected
by Tom in that he says his program will interface with a keyboard, so I will
have to look at it again?! The reason I am interested in keyboard generated CW
is because I used to run QRQ in excess of 60 wpm (up to 120 wpm) and I didn't
ever attempt to push a mechanical key to those speeds. While I still use the
old YPlog for QRQ (it will work, no stutter, up to 200 wpm) and NO, I never got
that high!). I also switched to a Dvorak layout keyboard to enable to get my
typing speed from about 40 wpm max to around 140 wpm (brief spurts..hihi).
73,
Tom - W4BQF
-----Original Message-----
From: Barry [mailto:k3...@comcast.net]
Sent: Friday, January 20, 2017 6:59 PM
To: Chester Alderman; 'Tom'; 'Elecraft'
Subject: Re[2]: [Elecraft] New release of Win4K3Suite supporting the SDRPlay
RSP2
Tom,
I, too, have been at for a while, but I'm really happy to have the
adjunct. I find it is really helpful for contesting, particularly, and pile up
busting where you are throwing your call out, and out, and out, etc. Pushing a
button to send 599 TU cuts down on fatigue. It's another useful tool in the bag
along with the spectrum display that can quickly show where there is activity,
but most importantly, I can see where the DX station is working that other guy
in a split operation; this works better than having a second receiver.
73,
Barry
K3NDM
------ Original Message ------
From: "Chester Alderman" <alderm...@windstream.net>
To: "'Tom'" <tom...@videotron.ca>; "'Elecraft'"
<el.ecr...@mailman.qth.net>
Sent: 1/20/2017 4:59:14 PM
Subject: Re: [Elecraft] New release of Win4K3Suite supporting the SDRPlay RSP2
>I've been a CW operator for a little more than 65 years, and I still
>enjoy it. What I can't comprehend about Win4K3 is why should I spend
>$50 for the program and then have to go spend >$100 for a program that
>does the CW generation for it?
>
>73,
>Tom - W4BQF
>
>
>-----Original Message-----
>From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
>Tom
>Sent: Friday, January 20, 2017 2:29 PM
>To: Elecraft
>Subject: [Elecraft] New release of Win4K3Suite supporting the SDRPlay
>RSP2
>
>Hello,
>There is a new release of Win4K3Suite. Of note in this release is
>support for the new SDRPlay RSP2 in addition to the RSP1. The SDRPlay
>can be used with the K3 and the IF output as a Panadapter and with a
>transmit / receive switch, can also be used with the KX3 and KX2
>providing a Panadapter display with a maximum span of 2MHz at very low
>cost.
>
>This release also has a new feature allowing Win4K3 to be used with
>hardware devices that only monitor Elecraft radios like antenna tuners,
>third party amps etc. Traditionally, one would need to make a serial
>port "Y"
>cable so
>that the devices could listen for frequency and band information. With
>Win4K3Suite all you need to do is plug your device into a free serial
>port on your system and then connect to it with Win4K3 telling it what
>information needs to be sent to the device. No need to fuss with
>cables.
>
>Win4K3Suite is the ultimate Elecraft control program supporting all
>hardware and seamless integration with many third party software and
>hardware products.
>
>You can find out more about Win4K3Suite by watching these videos
>https://www.youtube.com/results?search_query=win4k3suite
>
>and these reviews:
>https://www.eham.net/reviews/detail/11214
>
>Thanks you for your support!
>73 Tom
>va2fsq.com
>
>---
>This email has been checked for viruses by Avast antivirus software.
>https://www.avast.com/antivirus
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net Please help support this email
>list: http://www.qsl.net/donate.html Message delivered to
>alderm...@windstream.net
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net Please help support this email
>list: http://www.qsl.net/donate.html Message delivered to
>k3...@comcast.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
