Yes I had done that already. Am wondering if there might be a problem on
the other end of the wire. But it does sense the voltage of the batteries
when turned on with external power. I removed the charger, then the
unplugged and plugged the connector back in after checking that it showed
proper voltage on both sets of contacts. Then reinstalled charger board.
Made no difference. Guess I better contact Elecraft support.

On Mon, Jan 30, 2017 at 12:40 AM, Mark Petiford via Elecraft <
elecraft@mailman.qth.net> wrote:

> Re:  << My KX3 has suddenly decided that it doesn't want to turn on on
> battery power...so I plugged it in, turned it on, went to menu to turn on
> charger and got "BAT ERR" message >>
>
> I had a similar problem several years ago, and the problem was that the
> battery connector that connects the cell holder to the circuit board wasn't
> fully inserted into the pins on the circuit board.  Open the KX3 up and
> make sure the connector is fully mated.
>
> That would make some sense.  The KXBC3 Charger Installation and Operating
> instructions say the BAT ERR is due to, "Battery missing or battery voltage
> out of range due to a fully charged pack or a defective or missing cell."
> An intermittent connection would probably fit that description.
>
> Mark,
> KE6BB
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk...@gmail.com




-- 
Jim K0XU
j...@rhodesend.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to