I am not sure I understand your problem, and therefore my potential solution 
may be irrelevant.

I experienced sudden extremely low power output recently during a contest.

The solution was to re-install the firmware and recalibrate TX power.

I later determined the cause was voltage drop coming from the power supply.  I 
fixed loose connections in my power supply and put a short lead from the supply 
direct to the K3 and things are going well again.

Problem fixed at zero cost.
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of 
stengrevics
Sent: Thursday, February 9, 2017 7:10 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] No Output from K3S on WSJT MSK144

Was working fine, but today I have no output from the K3S on WSJT MSK144. If
I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I
can't get any reading on the ALC meter. Any suggestions would be
appreciated.

John
WA1EAZ



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/No-Output-from-K3S-on-WSJT-MSK144-tp7626575.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to 
gthorn...@thorntonmostullaw.com<mailto:gthorn...@thorntonmostullaw.com>

________________________________
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to