I would run the single PTT to the ATU rather than the amp, and a single PTT line to the amp from the ATU. The KAT500 needs to be able to break the PA key line to tune (switch small relays) at less than the full output of the PA.
73 de Dick, K6KR > On Feb 10, 2017, at 21:00, Richard Lawn <[email protected]> wrote: > > I have a setup with 4 different radios on the bench and I'd like to use > them all with my KAT500 and KPA500. One of the radios is a K3. The others > of course all have PTT outputs. I suppose there is no way to do this short > of making a switch box with all PTT lines from the 4 radios and a single > output to the PTT in on the KPA500. If I'm missing a possibility please let > me know. > > 73 > Rick, W2JAZ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
