Thanks Don. I finally figured that out. I also found a spare KPAK3AUX cable (I have no idea) in the shack. I'm up and running.
73, Mike AD5A Just a side note, I thought I ordered the KAT500-F, but I guess I ordered the kit. I brought the unopened box with me to a second QTH in Santa Fe, NM, where I was going to plug and play. Well I opened the box and realized that I had some work to do. I finished late and then tried to connect everything. My brain wasn't in high gear and reconciling the two diagrams just wasn't in the cards. After some coffee this morning and reviewing the drawings again, it made some sense. Then the fortuitous discovery of the needed cable, all is well. > On Feb 13, 2017, at 11:04 AM, Don Wilhelm <donw...@embarqmail.com> wrote: > > Mike, > > It does not include the P3, but there is a diagram for the rest on page 5 of > the KAT500 Owner's Manual. > Connect the P3 and K3 as shown in the P3 manual, These connections are > independent of the rest of the K-line connections. > > 73, > Don W3FPR > >> On 2/13/2017 10:48 AM, Mike Crownover wrote: >> I can't seem to find a hook up diagram for the entire K Line. I know I've >> seen it somewhere but can't find it. Can someone direct me to a diagram? >> >> Thanks in advance. >> >> Mike AD5A >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to donw...@embarqmail.com >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com