The K3/K3S draws peak current on transmit, and is generally greatest on
the higher bands (especially 6M) where efficiency of the output stage is
lower. The KAT500 draws max current when tuning. The rest of the time it
draws very little current. In general, any PSU that will run the radio
will also run low power accessories like the P3 and KAT500.
73, Jim K9YC
On Mon,2/13/2017 12:59 PM, Mike Furrey wrote:
Looking at the specs, the K3s could draw up to 25 amps max, the KAT500 could draw up to 1
amp max and the Powerwerx supply is rated at 25 amps continuous duty. Sooooo .... It
"may" be ok.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
