Have you looked here
http://www.elecraft.com/K3/k3_app_notes.htm Bob?
Phil W7OX
On 2/24/17 2:24 PM, Bob wrote:
Interesting....
That mod is not shown in the Elecraft web
pages. I did the KSYN3A updates in my K3 with
the sub RX. How would I know if I need this
mod unless someone points it out to me on the
air? My serial number is in the 5K range.
One of the allures of the Elecraft brand is the
ability to keep current. That should not mean
just firmware or purchase of major module
updates. I'd like to see a mod list for the
subtle hardware changes too. I may not decide
to do them immediately but would most likely do
any the next time the rig is removed from its
desktop position.
Same goes for other Elecraft gear like the
KAT500 and KPA500. For the XG3 there was a
recent firmware update to it. As of now I see
no need for it but knowing it exists I would do
it next time I use the XG3.
Hopefully the powers in charge can consider a
more complete mod/update listing. Maybe a
criterion to make the list could be, "What would
the factory do?" By that I mean which are
important enough for them to do when a piece of
equipment is returned for repair and updates.
73,
Bob
K2TK ex KN2TKR (1956) & K2TKR
On 2/24/2017 3:21 PM, GRANT YOUNGMAN wrote:
Is it possible you need the KPAIO3MDKT? This
cures some issues with electrical fan noise
getting into the transmit signal under some
conditions after the KSYN3A is installed in all
K3 radios and K3S radios before serial (about)
10730.
On Feb 23, 2017, at 9:42 AM, ke9uw
<[email protected]> wrote:
I set the TX GATE to ON 10 and the complaints
have been eliminated...although
one fellow is still straining to hear something.
Grant NQ5T
K3 #2091, KX3 #8342
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
