Chuck, Looks like your reply didn't go to the list, so I'm quoting it below for the benefit of other readers.
It looks like KG6IRW has the solution. From the Owner's Manual Errata: "IF THE SPEAKER IS NOT WORKING with headphones unplugged: Locate the CONFIG:SPKR+PH menu entry. Tap ‘1’ on the numeric keypad until you see PH.R SW–. The minus sign (-) indicates inverted switch logic for the jack on the KIO3B audio board. Exit the menu and re-save your configuration using K3 Utility." 73, Bob, N6TV On Sun, Feb 26, 2017 at 7:43 AM, Chuck Chandler <chandler...@gmail.com> wrote: > Which speaker doesn't work, the internal speaker or an external one > plugged into the SPKRS jack on the back? The internal one only. > > If internal, did you remember to connect the 2-pin cable to the header > before putting the top cover on? Yes, and since I just installed the SubRX > I was able to remove it and replace it carefully. > > If external, did you use a stereo plug or a mono plug? This morning I > used a stereo plug to two separate speakers for the rear jack - they are > working properly. Its only the internal one that isnt working. > > Re. mic gain, there's a SPEED / MIC knob on the front of the radio. Did > you turn it? Nope. When I did, all worked as it should transmit > audio-wise. > > Thanks for the pointers! Still learning.... any suggestions on the > internal speaker welcome... > > 73 de Chuck, WS1L > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
