You could use a line buffer.Check this page
http://www.kotarov.com/projects/k3-and-acom-2s1This is an adapter for acom 2S1
switch, but he also added a buffer to drive more then one decoder, just use
that part :-)BobYO8RNI
From: NOEL POULIN <ve2...@globetrotter.net>
To: Elecraft@mailman.qth.net
Sent: Saturday, March 11, 2017 12:38 AM
Subject: [Elecraft] K3S with more than one device on the Band Data signals
Hi to all,
I am on the way to connect a Bandpasser2 (band data mode) on a K3s.
Later I would like also to connect a band decoder on the same radio to
switch coaxial stubs.
I wonder if the K3s can handle more than one device connected to the
Band Data signals.
I suppose that Elecraft band output is probably designed to drive one
decoder and this decoder is designed with current maximums for each port.
I would appreciate comments and good tips about that fact...
Thanks
Noel
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to pituio...@yahoo.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
