All,
Also end the message memories with the "|" character so the RF ends
IMmediately.
If you are entering the message with the paddles use "IM" sent as one
character (no space).
You can use those same message memories on CW too, the | character is
ignored.
73,
Don W3FPR
On 3/13/2017 1:26 PM, Ed Muns wrote:
For DXpeditions and most contests, using the K3/K3S memories will send the
RTTY at normal 60 WPM speed. There is no reason to send CW and have the
RTTY come out at a slow speed which is rude to the other operator. All you
need is two memories programmed, one with your call sign and the other with
your exchange.
Ed W0YK
____________________________________________________________________________
_
-----Original Message-----
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of w7aqk
Sent: 12 March, 2017 22:52
To: Elecraft Reflector
Subject: [Elecraft] RTTY
I know this is "old hat" now, especially for serious RTTY buffs (which I am
not!), but every time I work one of these DXpeditions on RTTY, just using
the K3 and CW input, I get a big kick out of it. I just did that on 40
meters with TU7C in the Ivory Coast. I crank out CW at about 25-30 WPM and
the K3 does the rest! Cool! I could do this with my KX3 or KX2 if my
antennas were better!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
