Hi K3 08206, failed to power down, pressing the power button turned off the K3 display and the normal clicks were heard, but the LCD light remained on. pressing the power button again, would not bring the K3 on. Only removing the 13.8V for a few seconds and powering on brings it back. However the K3 will still not turn off properly.
I have saved the config, updated the firmware, and reset the K3 by pressing shift and powering on. I still have the same issue. I have not got anything attached to the rear apart from the Linear amp key line, and that has been removed. It looks like a hardware fault, if someone can give me some guidance. BR Andrew Lenton G8UUG -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-does-not-fully-powering-down-tp7629129.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com