The ModMic is an electret mic that can be added to your favorite headphones. I’ve been suggesting it to people for years, and I’m delighted to hear that someone is using it.
Electret mics are pretty flat, so just go with Jim Brown’s recommendations. You can see a graph comparing his recommended contour to Heil’s at my blog post (link below). I plotted all the contours posted to the Elecraft mailing list to compare them. About half were very similar to K9YC’s contour, and the rest were all over the place. https://observer.wunderwood.org/2015/09/09/transmit-audio-and-compression-with-the-elecraft-kx3/ <https://observer.wunderwood.org/2015/09/09/transmit-audio-and-compression-with-the-elecraft-kx3/> wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Apr 10, 2017, at 4:52 PM, Jim Brown <[email protected]> wrote: > > On Mon,4/10/2017 1:50 PM, Peter Chamalian wrote: >> Jim, a few questions on your settings. >> >> 1. Do you have a high, mid or low pitch voice? Mine tends to be mid to >> high. > > Relatively mid-range. > >> 2. What mic are you using? Have the Antlion condenser ModMike 4 > > I'm using a Yamaha CM500 boom headset. > >> Given these parameters, is there any changes you would suggest? > > I had never heard of this product, so googled to find the website. The > description of this mic is in conflict with itself -- it first calls it a > "noise cancelling mic" but down the page calls "uni-directional." VERY > different -- noise cancelling works on the basis of distance -- two perfectly > matched capsules, out of polarity, reject sound that isn't within an inch or > so of the mic. In general, they sound awful. Unidirectional mics are ok but > not great -- they suffer from proximity effect, which strongly boosts low > frequency sounds, wind, breath pop, and vibration (like handling noise). > > I wouldn't change my advice, which says start here and get reports. And that > settings for that 4th band and the high boost will depend on your voice and > the mic. With this mic, you're more likely to want greater cut of that 4th > band. > >> I realize I have to test this myself and get some feedback on quality and >> punch but if you had any thoughts I'd appreciate hearing them. > > I'd be happy to run a sked with you to help you judge settings. On one of > those increasing rare days that we have decent prop between W6 and W1. :) > > 73, Jim K9YC > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
