I've read some prior posts but don't quite see what I'm after. I'll use a MFJ-1840T 40m Whip on my KX2 in HT format, and have a 30ft length of 18g stranded copper wire with the min-banana plug soldered to it to use as a counterpoise. I have some 20g wire on order - with Radio Shack all but gone there is no "local" for such bits and pieces anymore :-(
The MFJ manual says 25'9" counterpoise length for bottom of band, which is off from the 1/4WL for 40m of 33'5". I assume the 25'9" is based on experimental data? Based on the 1/4WL calculation there is about 1'5" counterpoise length difference top-to-bottom on the 40m band, so I'm figuring that might be up to 26'2" for the MFJ-1840T Whip. What's a good way to start long and adjust shorter as needed - can I just coil the excess length? Bret/N4SRN -- View this message in context: http://elecraft.365791.n2.nabble.com/KX2-MFJ-1840T-Whip-Counterpoise-Adjustment-tp7630884.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com