Thanks for the quick replies. Sorry I forgot to mention I'm using a K3s. Thanks, Don.
Roman Brandau Sent from my iPhone > On Jun 3, 2017, at 19:45, Don Wilhelm <donw...@embarqmail.com> wrote: > > Roman, > > You did not say which transceiver you have, so I will try to give you the > full answer. > > If you have the K3S or a K3 with the updated KIO3B (with a USB input), then > the answer is yes. Plug the cable between your USB port and the K3S. > > But the KUSB implies that it is a USB to serial converter, not just a USB > cable. > If you can obtain a USB to RS-232 converter where you are it should work. > The chipset desired is FTDI. Others may work, but Prolific chipsets are > "iffy". > > OTOH, if you have a KX2 or KX3, you will need a 1/8 inch stereo plug on the > rig end. If you have a USB to serial adapter, you can build an RS-232 to 1/8 > inch stereo plug cable. Download the XG3 manual from Elecraft, there is a > schematic of the cable in that manual. > > 73, > Don W3FPR > >> On 6/3/2017 7:25 PM, Roman Brandau wrote: >> I'm on a mini DXPedition and left my KUSB at home. Can a regular USB A-B >> cable be used? I'm guessing no... >> Roman Brandau >> WU8R >> Sent from my iPhone >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to donw...@embarqmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com