Sent from my iPhone
> On Jul 18, 2017, at 7:12 AM, Don Wilhelm <donw...@embarqmail.com> wrote: > > Tom, > > Have you centered the CW signal in the CWT bargraph? That is necessary - use > auto-spot for an easy way to tune the signal to center. > You could try narrowing the filter width to isolate that one signal. > > 73, > Don W3FPR > >> On 7/17/2017 11:38 AM, Tom Parish wrote: >> >> Problem: I'm not seeing any CW decoding anymore except when I manually >> touch the paddles. >> I can hear CW signals coming in strong but no decoding seems to be occuring >> for them. >> Settings: >> MODE: CW >> FILTER: .45 >> CWT: on >> Logging: On >> Green LED is showing >> RX Thr - I've tried from THR1-THR4 - no change >> The "T" is showing in the lower right hand corner > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wp...@aol.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com