Aaron,
The most likely cause is that the nut on the BNC jack has worked loose.
It should be easy to tighten, although you will likely have to remove
the 2 meter option (if you have it) and the KXAT3.
See page 25 of the KX3 Assembly Manual.
Use a wrench to tighten the nut, and while tightening the nut, put a BNC
connector on the outside of the jack and hold it with pliers so you can
torque the nut tight without damaging the BNC jack.
73,
Don W3FPR
On 8/22/2017 9:54 AM, Aaron K5ATG wrote:
The BNC Connector on my KX3 has become loose, is there a way to repair it?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
