Gary,
With any soundcard data mode, you should be in DATA A with MIC SEL set
to LINE IN. That includes WSJT.
When using the internal soundcard, make certain there is nothing
connected to the LINE IN jack - it takes precedence over the output of
the internal soundcard.
As always, set the audio level to show 4 bars solid on the ALC meter
with the 5th bar flashing (the WSJT instructions are not correct for the
K3/K3S). Adjust the power level with the POWER knob.
73,
Don W3FPR
On 9/5/2017 5:21 PM, Gary Smith wrote:
The topic has recently drifted a bit from
my original question but the information
given has been interesting. As I'm using a
K3s and its internal sound card, I put
away my Creative USB 0404 card, though it
was a fine card to use with the K3.
I have gotten WSJT running though I
haven't yet scored a QSO, this means I
probably have something not set quite
right yet. I do have a question specific
for the K3s, maybe K3; Do I have the K3s
set in USB mode or in the data mode when
using WSJT?
And thank you to all who replied to my
initial questions, I truly appreciate it.
73,
Gary
KA1J
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donw...@embarqmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
