I think John is asking about LINE OUT of the K3 for TX audio into the PC for MMTTY decode.
73, Ed W0YK On Sep 8, 2017 12:50 PM, Don Wilhelm <donw...@embarqmail.com> wrote: > > John, > > Look back to posts earlier today regarding WSJT-X. > > We have been discussing how to set the audio levels for WSJT-X, but the > same thing applies to and all other soundcard digital modes, including > AFSK A - which you should be using with MMTTY. It defaults to LSB, > turns off compression and TX EQ (so you don't have to disturb your SSB > settings). See the manual for the features available with AFSK A mode. > > Set the MIC SEL to LINE. > > Like all other data modes with the K3 (and other Elecraft gear), set the > audio for 4 bars on the ALC meter with the 5th one flashing. Adjust the > power with the POWER knob. > Ignore the common internet advice (and some software instructions) which > say to "set the power to maximum and use the audio level to control the > power" - that does not work well with Elecraft gear because it is unique > among amateur tranceiver in the way the power is controlled. > Some commercial transceivers control power in the same way as Elecraft > gear, but no other amateur transceivers that I am aware of. > > 73, > Don W3FPR > > On 9/8/2017 3:02 PM, John Reilly wrote: > > I have the USB interface card in my K3. I use the audio out (USB > > Microphone) for the MTTY program. Question is how to set the audio > > levels. FWIW, I currently have the K3 Line Out set to 5, and the > > computer USB Mic level set to around mid-scale. Is there a better > > combination for improved dynamic range and low distortion? > > Thanks, > > - 73, John, N0TA > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to donw...@embarqmail.com > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to e...@w0yk.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
