Jim,
The power level can be set up to 120mW.
The frequency range is about 2MHz. I recall that initially the internal
2 meter transceiver design was to be for a 50MHz IF, but was later
changed to a 28MHz IF which required switching between 2 crystals to
cover the entire 2 meter band.
That is a limitation imposed by the 10 meter bandpass filters.
If that information is not correct, I am certain that someone at
Elecraft will provide corrections.
73,
Don W3FPR
On 9/11/2017 2:36 PM, Jim Rhodes wrote:
Can someone tell me the output range of freq for 10 meter if and power
output level. Using the "a" version.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
