What sub-mode on 30 meters? Sent from my iPhone ...nr4c. bill
> On Oct 3, 2017, at 3:35 PM, Bob <wb4...@gmail.com> wrote: > > Hi, > > I have a K3s with FW 5.60. > > On all bands except 30 meters, when I place the rig into the DATA mode, I > see the green RX window on my P3 showing to the right of the center (dial) > frequency and matching my selected filter width. This is what I'd expect > as DATA should be sending the equal of USB. However, on the 30 meter band > only, the green RX windows is half above and half below the center (dial) > frequency. It's acting like the mode is AM. Also I can't shift the filter > below 1.1 KHz (at least for a 2.8 KHz filter). > > This must be some "Per Band" feature that I am not understanding. > > Any idea as to how I can get 30 meters to work like the rest of the bands? > > 73, Bob, WB4SON > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
