Hello Forum. I have two PC's "A" & "B" running on WIN 10.
I now have two Transceivers: An Icom 7800 connected to PC "A" via a 232 port/USB serial converter cable. This enables my logging Program Logic 9 installed on PC "A" to read the frequency, mode, etc from the 7800. LOgic 9's database is on PC "A". I have an Elecraft K3s connect to PC "B" via their USB ports, and operate my Data modes (FlDigi) Easypal, CW, Olivia, RTTY, ect, using PC "B". However I have to*manually* enter all the QSO's worked on the K3s into LOgic 9 on PC "A". Retaining the USB link between the K3s and PC(B), I would like to connect a link between the K3s and LOgic9 on PC "A", to input the frequency, mode, etc from the K3s QSO's. I only use one radio at any one time, switching the PTT and antenna connection's manually. Ross (G4PEL) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
