Hi Jim. I have the PSC-4-6+ which I put in my own enclosure. I use that together with the DX-Engineering preamp. Before that I was using the DX-Engineering 2-port splitter but I needed more ports, i.e. this one https://www.dxengineering.com/parts/dxe-rsc-2 .
The MiniCircuits one works fine.They also have units going much higher in frequency. 73, Yngvi TF3Y On Mon, Nov 6, 2017 at 1:13 PM, Jim Miller <j...@jtmiller.com> wrote: > I'm looking at this splitter to set up diversity for my K3s. It will only > be connected to RX paths. > > https://www.minicircuits.com/WebStore/dashboard.html?model=ZSC-2-1BR%2B > > It goes down to 100Khz and up to 400Mhz. > > BNC connections and a rear bracket make it fit well with my setup. > > Anyone see a problem with it? > > Price seems reasonable for something built with a nice metal case, BNCs and > quality. > > Suggestions? > > 73 > > jim ab3cv > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to t...@tf3y.net > -- http://www.tf3y.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
